Kitchen Kompact D White - Lazy Susan Corner Cabinets (LS)

*Please allow 3-5 days for products to arrive at store*
DWhite: Painted white, shaker style door frames are made of solid beech mortised and tenoned. The recessed plywood insert is three-ply with a rotary cut hard maple veneer. Face frames are built using a mixture of solid beech and sycamore. Drawer heads have routed finger pulls.

Frames: All frames are built of solid 3/4" hardwoods. Each rail is kiln-dried, joined by mortise and tenon, then glued for added strength.

End Panels: End panels are wood veneered, 1/2" thick engineered wood core
plywood, fastened to front frame with tongue-in-groove construction.

Backs: 1/8" hardboard, recessed in sides.

Bottoms: 3/16" hardboard dadoed into sides and power nailed into
supporting strips.

Hanging Rails: Solid wood, 3/4" x 1-1/2", located at top.

Corners: Plastic corner braces power nailed.

Toe Kick: 3/4" pine.

Shelf: 1/2" engineered wood 11" deep dadoed into sides, with rounded front
edge and printed wood grain.

Hardware: Chadwood, Glenwood, Warmwood, and DWhite feature concealed
self-closing hinges — no door pulls included.

Finish: A 4-step process is applied to the exterior finish of Glenwood,
Warmwood, and Chadwood: Stain, Sealer, Sanding, and Catalyzed Top Coat.
This finish is resistant to household chemicals such as water, beverages, mild
acids – even nail polish. A 3-step process is applied to the exterior finish of
DWhite: Primer (2 coats), Sanding, and Enamel.

Lazy Susan:

Frames: All frames are built of solid 3/4" hardwoods. Each rail is kiln-dried,
joined by mortise and tenon, then glued for added strength.

End Panels: Not required unless cabinet is used at the end of a run.

Toe Kick: 3/4" pine.

Shelf: High impact polystyrene shelves have internal struts for maximum
strength.

Hardware: Engineered with an adjustable mechanism (detail A) for aligning
the vertical and rotational position of cabinet doors within the cabinet
frame. The nylon gear and cam mechanism requires no lubrication.

Finish: A 4-step process is applied to the exterior finish of Glenwood,
Warmwood, and Chadwood: Stain, Sealer, Sanding, and Catalyzed Top Coat.
This finish is resistant to household chemicals such as water, beverages, mild
acids – even nail polish. A 3-step process is applied to the exterior finish of
DWhite: Primer (2 coats), Sanding, and Enamel.